+49 6221 8278-0
info@progen.com

anti-AAV1 (intact particle) mouse monoclonal, ADK1a, lyophilized, purified

Key Features
  • Purified, lyophilized
  • Mouse monoclonal
  • Suitable for dot blot, ELISA, ICC/IF and neutralization assay
  • Reacts with AAV1, AAV6, AAV12 intact capsids
  • Isotype: IgG2a lambda
Product description
Quantity 50 µg
Antibody Type Monoclonal
Host Mouse
Isotype IgG2a lambda
Conjugate Unconjugated
Application Affinity chromatography, Dot blot, ELISA, ICC/IF, IP, Neutralization assay
Purification Affinity chromatography
Reactivity AAV1, AAV6, AAV12
No reactivity AAV2, AAV3, AAV4, AAV5, AAV7, AAV8, AAV9, AAV11, AAVDJ, AAVrh10, AAVrh74
Storage before reconstitution 2-8°C until indicated expiry date
Storage after reconstitution Up to 3 months at 2-8°C; long term storage in aliquots at -20°C; avoid freeze/thaw cycles
Intended use Research use only
Clone ADK1a
Immunogen AAV1 capsids
Concentration 50 µg/ml after reconstitution with 1 ml dist. water
Formulation Lyophilized; reconstitute in 1 ml dist. water (final solution contains 0.09% sodium azide, 0.5% BSA in PBS buffer, pH 7.4)
Binding affinity

KD value (AAV1) = <1.0E-12 M

KD value (AAV6) = <1.0E-12 M

Synonym Adeno-associated virus 1; AAV-1
Applications
Tested applications Tested dilutions
Immunocytochemistry (ICC)/ Immunofluorescence (IF) 1:20
Affinity Chromatography Assay dependent
Dot Blot 1:500 (0.1 µg/ml; non-denaturing conditions)
ELISA Assay dependent
Immunoprecipitation (IP) 1:5
Neutralization Assay EC50 ~2 ng/ml (AAV1) and ~2 ng/ml (AAV6) - assay dependent
Background

For characterization of different stages of infection and very useful for the analysis of the AAV assembly process. ADK1a specifically reacts with intact adeno-associated virus particles, empty and full capsids. Recognizes a conformational epitope of assembled capsids, not present in denatured capsid proteins and native but unassembled capsid proteins. The antibody cannot be used for immunoblotting.

Limited Use Label License: Research Use Only
Product is exclusively licensed to PROGEN Biotechnik GmbH. The use of these products for the development, manufacturing and sale of secondary products/derivatives which are based on the purchased products and/or which include the purchased product require a royalty based sub-license agreement.

References/Publications (8)
Publication
Species
Application
Downloads
Customer Reviews

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


FAQs
The concentration of unpurified supernatant, ascites, unpurified guinea pig serum and unpurified rabbit serum is not determined.
The concentration of purified antibodies is mentioned on the datasheet.
For prediluted antibodies the concentration may vary from lot to lot. The concentration of these antibodies is not mentioned on the datasheet and can be requested at support@progen.com.

Most of our purified mouse antibodies contain 0.5% BSA as stabilizer. If BSA was added to the antibody solution, it is stated in the datasheet.
The supernatant format contains FCS proteins from cell culture medium supplemented with FCS.
The serum antibodies contain other proteins present in serum.

Please find the solvent for reconstitution and the amount of liquid for reconstitution on the antibody datasheet. The buffer formulation after reconstitution is also mentioned in the datasheet.
PROGEN offers different formats for mouse monoclonal antibodies.  Different antibodies may not be offered in each format, the following are all possible formats:
  1. Supernatant and supernatant concentrate: This format contains hybridoma cell culture supernatant. The antibody is not purified and the antibody concentration is not determined. The antibody concentration may vary from lot to lot. Therefore we recommend to titrate the optimal concentration for the application used for each new lot.
  2. Lyophilized, purified: This format contains purified antibody in lyophilized form. The reconstitution of this antibody is described in the datasheet. The buffer composition after reconstitution is also mentioned on the datasheet. 
  3. Liquid, purified: This format contains purified antibody in liquid format. The concentration is mentioned on the datasheet. 
  4. Prediluted, purified: This format contains purified antibody in liquid format. Most antibodies in this format are diluted to be ready-to-use for IHC with standard tissue. But some antibodies of this format need further dilution for IHC. This is mentioned on the datasheet.

Lyophilized antibodies can be stored at 2-8°C until expiration.
Most of our liquid antibodies and reconstituted lyophilized antibodies may be stored for short term storage (up to 3 month) at 2-8°C. For long term storage we recommend to store the antibody at -20°C in aliquots. Please avoid freeze and thaw cycles.
Most of our conjugated antibodies should be stored at 2-8°C.
The individual storage conditions are mentioned on the datasheet.

The expiration date of our antibodies is indicated on the product label.
We offer bulk amounts starting from 1 mg for many of our mouse monoclonal or recombinant antibodies. Please contact us for further information or use the “bulk button” on the product page.
The optimal antibody dilution for your specific protocol and application needs to be titrated in your lab with your equipment and sample. The optimal dilution may vary between protocols and samples. A good dilution for starting the titration is the dilution mentioned in the datasheet. If the sample needs a specific treatment (eg. Antigen retrieval for IHC on FFPE sections) this should also be mentioned on the antibody datasheet. 

Anti-Adeno-Associated Virus Capsid Proteins Antibodies

For more information on the antibody binding epitopes of the capsid protein antibodies A1, B1 and A69 see the table below summarizing the published data from the following publication on the specific antibody binding sites:

Table Binding Sites of the AAV capsid protein antibodies

Wobus, C. E. et al. Monoclonal antibodies against the adeno-associated virus type 2 (AAV-2) capsid: epitope mapping and identification of capsid domains involved in AAV-2-cell interaction and neutralization of AAV-2 infection. J. Virol. 74, 9281–93 (2000).

Anti-Adeno-Associated Virus Particle Antibodies

For more information on the antibody binding epitopes on assembled AAV1, 2, 5, 8 and 9 capsids, see the tables below summarizing the published data from the following publications on the specific antibody binding sites:

summary binding epitopes


EM structures of assembled AAV1, 2, 4, 5, 6, and 8 capsids with Fab-fragments are available in the following publications:


PROGEN antibodies are shipped at ambient temperature. The antibodies are stable at ambient temperature for the shipment period. Please store the antibodies as indicated in the datasheet upon arrival.

Related Products

AAV1 ELISA Control
Cat. No. PRAAV1-C
  • Consists of fully assembled, empty AAV1 capsids
  • Represents serotype-specific conformational epitopes
  • Reliable positive control for ELISA

€110.00*
AAV1 empty capsids
Cat. No. 66V010
  • Fully assembled, empty AAV1 capsids
  • Serotype-specific conformational epitopes
  • Reliable positive control for dot blot, western blot, ELISA
  • Quality controlled for purity, AAV titer and filling grade
  • Alignment to internal reference standard material
Not available in the Russian Federation.
For US shipment, the packages are only sent out for delivery on Mondays and Tuesdays, in the EU from Monday until Wednesday.

€269.00*
AAV1 standard material (eGFP)
Cat. No. 66V011
  • Fully assembled AAV1 capsids filled with an eGFP reporter gene controlled by a CMV promoter
  • Serotype-specific conformational epitopes
  • Reliable positive control for dot blot, western blot, ELISA, PCR and cell-based assays
  • Quality controlled for purity, filling grade, aggregation, total capsid and genome titer
  • Alignment to internal reference standard material
Not available in the Russian Federation.
For US shipment, the packages are only sent out for delivery on Mondays and Tuesdays, in the EU from Monday until Wednesday.

€580.00*
AAV1 Titration ELISA
Cat. No. PRAAV1
  • ELISA for quantitation of AAV1 capsids
  • Detection of full and empty AAV1 capsids
  • ADK1a antibody is used as capture and detection antibody

€560.00*
anti-AAV VP1/VP2/VP3 mouse monoclonal, B1, liquid, purified
Cat. No. 690058
Quantity: 1 ml
  • Mouse monoclonal
  • Suitable for affinity chromatography, dot blot, ICC/IF, IP and WB
  • Reacts with denatured VP1, VP2, VP3 proteins of AAV1, 2, 3, 5, 6, 7, 8, 9, rh10, DJ
  • Isotype: IgG1

Variants from €110.00*
€382.00*
anti-AAV VP1/VP2/VP3 rabbit polyclonal (VP51), serum
Cat. No. 61084
  • Rabbit polyclonal
  • Suitable for ELISA, ICC/IF, IP and WB
  • Reacts with AAV1, AAV2, AAV3, AAV5, AAV6, AAV7, AAV8, AAV9, AAVrh10, AAVDJ and AAVrh74, weakly with AAV4
  • Strong affinity for denatured capsid proteins
  • Weak affinity for native capsids

€382.00*
anti-AAV1 (intact particle) mouse monoclonal, ADK1a
Cat. No. 610150_1
  • Mouse monoclonal
  • Suitable for dot blot, ELISA, ICC/IF and neutralization assay
  • Reacts with AAV1, AAV6, AAV12 intact capsids
  • Isotype: IgG2a lambda

From €110.00*
anti-AAV1, human chimeric, ADK1a-h1
Cat. No. 692350
Quantity: 1 ml (50 µg/ml)
  • Recombinant chimeric (human Fc region)
  • Suitable for dot blot, neutralization assay and serology ELISA
  • Reacts with AAV1 and AAV6 intact capsids
  • Isotype: IgG1

Variants from €170.00*
€450.00*
Dip’n’Check AAV1 and AAV6 - lateral flow assay
Cat. No. PR5216
  • Rapid lateral flow test for the detection of AAV1 and AAV6 capsids
  • Semi-quantitative AAV titer determination in cell lysates and purified preparations
  • Detection of full and empty AAV1 and AAV6 capsids

€163.00*
OptiPrep™ - Iodixanol
Cat. No. 1893
  • Highly effective density gradient media for the separation of full and empty AAV particles
  • Designed for the purification of viruses (such as AAV)
  • Useful to isolate different cell types and organelles
  • Ready-made, sterile and endotoxin-tested solution of iodixanol

 

€178.00*
Simple Plex AAV1 Assay
Cat. No. SPCKB-OT-007969
  • Automated ELISA kit for quantification of AAV1 virons and assembled capsids
  • ADK1a antibody (Cat. No. 610150) is used as capture and detection antibody
  • Suitable for the ProteinSimple Ella system
Product is not available in APAC countries

€798.00*