Top product

AAV2 Xpress ELISA

Cat. No. PRAAV2XP

Available, delivery time 1-7 days

€685.00*

Key Features
Fast, easy and reliable AAV2 titer determination:
  • get results in less than 2 hours and increase your daily sample throughput
  • easy workflow & process integration
  • same accuracy and reproducibility as the standard AAV2 Titration ELISAs
  • A20R antibody is used as capture and detection antibody
Product description
Quantity 96 tests
Reactivity AAV2
Storage 2-8°C
Intended use Research use only
Application ELISA
Product description Unique microtiter plate enzyme immunoassay for the quantitation of intact filled and empty AAV2 capsids of AAV2. The capture-antibody detects a conformational epitope not present on unassembled capsid proteins.
Kit Control/Standard Empty capsid preparation of AAV2
Form supplied Reagent kit, 12 x 8-well strips
Background

Fast, easy and reliable AAV2 titer determination with PROGEN's AAV2 Xpress ELISA:

  • assay time was reduced to less than 2 hours by adjustment of the kit components and the protocol of our standard AAV2 Titration ELISA 2.0R
  • seamless and risk-free transition from our standard AAV2 Titration ELISAs (PRAAV2R and PRATV) to the Xpress version since the composition of the kit’s core characteristics are not changed
  • same accuracy and reproducibility as the standard AAV2 Titration ELISAs

The ELISA principle:

The assay is based on the sandwich ELISA technique where a recombinant antibody specific for a conformational epitope on assembled AAV capsids is coated onto the plate and is used to capture AAV particles from the specimen.

The detection of captured AAV particles is a two-step process.

  1. A biotin-conjugated recombinant antibody is bound to the captured AAV particles.
  2. A streptavidin peroxidase conjugate reacts with the biotin molecules. The addition of the substrate results in a color reaction which is proportional to the amount of specifically bound viral particles.

Comparison of AAV Quantification Methods:

Each of the commonly used quantification methods has its pros and cons:

  • qPCR is widely used, but suffers from several issues such as sample preparation, primer design, or PCR efficiency that can lead to high inter-laboratory variation of results.
  • Digital droplet PCR methods overcome some of the limitations of qPCR. However, variations between labs can still occur due to different sample processing protocols.
  • Dot blot is a simple and quantitative method, if reliable reference material is used. However, it suffers from the limited linearity and dynamic range of western blotting in general.

Given the practical drawbacks of the aforementioned techniques, a conventional sandwich ELISA currently appears to be superior in terms of inter- and intralaboratory variation as well as ease of use. Therefore, it represents the best format for reliable and reproducible quantification of total rAVV capsid titers.

Use of shuffled/mutated AAV:

The recognition of shuffled/mutated AAV vectors depend on the specific capsid region which is affected by the shuffling/mutation. The capture antibodies used for PROGEN’s AAV ELISAs bind specific and, in some cases, well defined conformational epitopes. These epitopes are generated by the capsid assembly of the corresponding AAV serotypes. A first indication that the ELISA might recognize your shuffled/mutated AAV vector is the presence of the antibody-binding epitope. However, changes in the protein sequences of the capsid proteins might also influence conformation of the proteins, hence the conformation of the epitopes presented on the AAV capsid. This might influence binding affinity of the antibody and affect determination of the titer based on the (non-shuffled) Kit Control provided with the AAV ELISA kit. Since these properties strongly depend on the specific shuffling/mutation performed, PROGEN cannot guarantee successful and precise quantification of your shuffled/mutated AAV vector. Even if the antibody binding epitopes are still present on your shuffled/mutated AAV capsid, your assay needs to be tested and optimized for your specific AAV vector.

PROGEN highly recommends the production and calibration of a suitable (shuffled/mutated) Kit Control, to ensure reliable titer determination of your individually shuffled/mutated AAV vector with PROGEN ELISA kits.

Limited Use Label License: Research Use Only
Product is exclusively owned by PROGEN Biotechnik GmbH. The use of these products for the development, manufacturing and sale of secondary products/derivatives which are based on the purchased products and/or which include the purchased product require a royalty based sub-license agreement.

 

 

Downloads
File
Category
Size
Filetype
Category
Size 429.21 KB
Filetype pdf
Category Performance data
Size 335.44 KB
Filetype pdf
Category Kit manual
Size 666.98 KB
Filetype pdf
Q & A's

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Customer Reviews

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


FAQs
In house validation shows that our PROGEN AAV ELISA kits can be used under GMP conditions. However, it is also necessary to validate kits under your individual conditions. If you need support with your validation you can contact us at support@progen.com. 
Performance data is available here.
The recognition of shuffled AAV vectors depends on the specific capsid region which is affected by the shuffling. The capture antibodies used for PROGEN’s AAV ELISAs bind specific and, for some of the antibodies, well defined conformational epitopes. These epitopes are generated by the capsid assembly of the corresponding AAV serotypes. 

A first indication that the capture antibody recognizes your shuffled AAV vector is the presence of the antibody-binding epitope. However, changes in protein sequences of the capsid proteins might also influence conformation of the proteins and furthermore the conformation of the epitopes presented on the AAV capsid. Thus, binding affinity of the antibody and determination of the titer based on our Kit Control (non-shuffled) might be influenced and affected. 

Since these properties strongly depend on the specific shuffling performed, PROGEN cannot guarantee successful and precise quantification of your shuffled AAV vector. Even if the antibody binding epitopes are still present on your shuffled AAV capsid, your ELISA assay needs to be tested and optimized for your specific AAV vector. PROGEN recommends the production and calibration of a suitable (shuffled) Kit Control, to ensure reliable titer determination of your individually shuffled AAV vector.

For more information on the antibody binding epitopes on assembled AAV1, 2, 5, 8 and 9 capsids, see the tables below summarizing the published data from the following publications on the specific antibody binding sites:

Residues for A20 and ADK8 binding

Contact sides and footprint residues for ADK1a/1b

Contact sides and footprint residues for ADK5a/5b

Due to the high affinity and specificity of the AAV capture antibodies used for the PROGEN AAV ELISA kits, the detection of AAV particles from cell extracts is possible. However, detection is only possible within the reading range of the ELISA kits and reliable quantification depends on adequate titration of the corresponding samples. Furthermore, the detection of AAV capsids from cell extract can be influenced by several conditions, e.g. the composition of your lysis buffer. For example, high salt concentrations in your buffer might inhibit adequate capsid detection. For more information, see the following publication:

Grimm, D. et al. Titration of AAV-2 particles via a novel capsid ELISA: packaging of genomes can limit production of recombinant AAV-2. Gene Ther.6, 1322–30 (1999).
Yes, PROGEN offers serotype-specific AAV ELISA Controls for the standardization of your AAV titer determination.

The serotype-specific positive controls are fully characterized empty AAV capsids standardized with PROGEN´s internal gold standards* (AAV1, AAV3, AAV5, AAV6 & AAV9) or the ATCC international gold standard material (AAV2 & AAV8).

*For more information on PROGEN´s internal gold standard, take a look at our posters "Developing Reliable AAV Standards for ELISA" and "The New AAV3 Titration ELISA" describing the establishment and characterization of AAV5 and AAV3 internal gold standards.
For AAV particle purification we recommend OptiPrep produced by Serumwerk Bernburg AG. You can find alternative density gradient media on our density gradient media page.
PROGEN’s AAV ELISA kits are provided with one pre-coated microtiter plate containing 12 x 8-well-strips.

PROGEN recommends the use of seven serial dilutions of the provided Kit Control (standard curve), two blank controls and 2-3 dilutions of the unknown AAV samples to ensure a reliable quantification of AAV titers. The Kit Control and the AAV samples need to be tested in duplicates to provide accurate results (for further information take a look at the instructions provided with the AAV ELISA kit).

Bearing this in mind, once you have applied the standard curve, forty duplicate measurements can be applied.
PROGEN offers AAV Titration ELISA kits for the quantification of AAV serotypes 1, 2, 3, 5, 6, 8, 9, and rh10 and AAV Xpress ELISA kits for AAV serotypes 2, 5, 6,  8, and 9.
Some of PROGEN´s AAV ELISA kits show cross-reactivity with other AAV serotypes. For example, the AAV2 ELISA kit cross-reacts with AAV3.

However, the AAV2 ELISA kit is not suitable for quantifiying the total AAV capsid content of AAV3 preparations. We recommend using the corresponding ELISA for your specific AAV serotype to ensure reliable capsid titer quantification, due to the ELISA's serotype-specific calibration. 

To learn more about cross-reactivities of the AAV antibodies take a look at the table below and the corresponding publications:

Table:crossreactivity of AAV Antibodies

  1. Mietzsch, M. et al. OneBac: Platform for Scalable and High-Titer Production of Adeno-Associated Virus Serotype 1–12 Vectors for Gene Therapy. Hum. Gene Ther.25, 212–222 (2014).
  2. Wobus, C. E. et al. Monoclonal antibodies against the adeno-associated virus type 2 (AAV-2) capsid: epitope mapping and identification of capsid domains involved in AAV-2-cell interaction and neutralization of AAV-2 infection. J. Virol.74, 9281–93 (2000).
  3. Kuck, D., Kern, A. & Kleinschmidt, J. A. Development of AAV serotype-specific ELISAs using novel monoclonal antibodies. J. Virol. Methods140, 17–24 (2007).
AAV Xpress ELISAs were developed based on the corresponding AAV Titration ELISAs.

The only difference is the adjustment of the kit components to shorten the incubation time for the AAV Xpress ELISAs from 3 hours and 15  minutes to 1 hour and 20 minutes. The process is the same for both the AAV Xpress ELISAs and the AAV Titration ELISAs.

All the AAV Titration ELISAs and the AAV Xpress ELISAs have been calibrated based on the ATCC standard material (AAV2 & AAV8) and the PROGEN internal gold standard material (AAV1, AAV3, AAV5, AAV6, AAV9 & AAVrh10), respectively.

AAV shortprotocols

Related Products

AAV2 ELISA Control
Cat. No. PRAAV2-C
  • Consists of fully assembled, empty AAV2 capsids
  • Represents serotype-specific conformational epitopes
  • Reliable positive control for ELISA

€110.00*
AAV2 empty capsids
Cat. No. 66V020
  • Fully assembled, empty AAV2 capsids
  • Serotype-specific conformational epitopes
  • Reliable positive control for dot blot, western blot, ELISA
  • Quality controlled for purity, AAV titer and filling grade
  • Alignment to internal reference standard material
Not available in China and in the Russian Federation.
For US shipment, the packages are only sent out for delivery on Mondays and Tuesdays, in the EU from Monday until Wednesday.

€269.00*
AAV2 Titration ELISA
Cat. No. PRATV
  • ELISA for quantitation of AAV2 capsids
  • Detection of full and empty AAV2 capsids
  • A20 antibody is used as capture and detection antibody

€560.00*
AAV2 Titration ELISA 2.0R
Cat. No. PRAAV2R
  • ELISA for quantitation of AAV2 capsids
  • Detection of full and empty AAV2 capsids
  • A20R antibody is used as capture and detection antibody

€560.00*
AAV2 VP1 + VP2 + VP3, recombinant proteins, set
Cat. No. 72001
•    Recombinant AAV2 VP1-3 capsid protein set
•    Useful for ratio analysis
•    Precise molar concentration
•    Suitable for WB, dot blot, CE, SDS PAGE

Not available in China and in the Russian Federation.
For US shipment, the packages are only sent out for delivery on Mondays and Tuesdays, in the EU from Monday until Wednesday.


€753.00*
AAV2 VP1, recombinant protein
Cat. No. 640823
•    Recombinant AAV2 capsid protein VP1
•    Useful in combination with AAV2 VP2 and VP3 for ratio analysis (also available as set, Cat. No. 72001)
•    Precise molar concentration
•    Suitable for WB, dot blot, CE, SDS PAGE

Not available in China and in the Russian Federation.
For US shipment, the packages are only sent out for delivery on Mondays and Tuesdays, in the EU from Monday until Wednesday.

€291.00*
AAV2 VP2, recombinant protein
Cat. No. 640824
•    Recombinant AAV2 capsid protein VP2
•    Useful in combination with AAV2 VP1 and VP3 for ratio analysis (also available as set, Cat. No. 72001)
•    Precise molar concentration
•    Suitable for WB, dot blot, CE, SDS PAGE

Not available in China and in the Russian Federation.
For US shipment, the packages are only sent out for delivery on Mondays and Tuesdays, in the EU from Monday until Wednesday.


€291.00*
AAV2 VP3, recombinant protein
Cat. No. 640825
•    Recombinant AAV2 capsid protein VP3
•    Useful in combination with AAV2 VP1 and VP2 for ratio analysis (also available as set, Cat. No. 72001)
•    Precise molar concentration
•    Suitable for WB, dot blot, CE, SDS PAGE

Not available in China and in the Russian Federation.
For US shipment, the packages are only sent out for delivery on Mondays and Tuesdays, in the EU from Monday until Wednesday.



€291.00*
AAV2 Xpress ELISA
Cat. No. PRAAV2XP
Fast, easy and reliable AAV2 titer determination:
  • get results in less than 2 hours and increase your daily sample throughput
  • easy workflow & process integration
  • same accuracy and reproducibility as the standard AAV2 Titration ELISAs
  • A20R antibody is used as capture and detection antibody

€685.00*
anti-AAV VP1 mouse monoclonal, A1, lyophilized, purified
Cat. No. 61056
  • Mouse monoclonal
  • Suitable for ELISA, ICC/IF, IP and WB
  • Reacts with VP1 of AAV1, AAV2, AAV3, AAV5, AAV6, AAV7, AAV8, AAV9 and AAVDJ
  • Isotype: IgG2a

€382.00*
anti-AAV VP1/VP2 mouse monoclonal, A69, lyophilized, purified
Cat. No. 61057
  • Mouse monoclonal
  • Suitable for ICC/IF, IP and WB
  • Reacts with AAV2 and AAVDJ
  • Isotype: IgG1

€363.00*
anti-AAV VP1/VP2/VP3 mouse monoclonal, B1, liquid, purified
Cat. No. 690058
Quantity: 1 ml
  • Mouse monoclonal
  • Suitable for affinity chromatography, dot blot, ICC/IF, IP and WB
  • Reacts with VP1, VP2, VP3 proteins of AAV1, 2, 3, 5, 6, 7, 8, 9, rh10, DJ
  • Isotype: IgG1

Variants from €110.00*
€382.00*
anti-AAV VP1/VP2/VP3 rabbit polyclonal (VP51), serum
Cat. No. 61084
  • Rabbit polyclonal
  • Suitable for ELISA, ICC/IF, IP and WB
  • Reacts with AAV1, AAV2, AAV3, AAV4, AAV5, AAV6, AAV7, AAV8, AAV9, AAVrh10, AAV11 and AAV12

€382.00*
anti-AAV2 (intact particle) mouse monoclonal, A20, lyophilized, purified
Cat. No. 61055
Quantity: 50 µg
  • Purified, lyophilized
  • Mouse monoclonal
  • Suitable for dot blot, ELISA, ICC and neutralization assay
  • Reacts with AAV2, AAV2 7m8 and AAV3 intact particles
  • Isotype: IgG3

Variants from €110.00*
€382.00*
anti-AAV2 (intact particle) mouse recombinant, A20R, lyophilized, purified
Cat. No. 610298
Quantity: 50 µg
  • Purified, lyophilized
  • Recombinant antibody
  • Suitable for dot blot, ELISA, neutralization assay
  • Reacts with AAV2, AAV3, AAV2 7m8 and Anc80 intact particles
  • Isotype: mouse IgG1

Variants from €110.00*
€382.00*
anti-AAV2 Replicase mouse monoclonal, 226.7, supernatant
Cat. No. 65172
  • Mouse monoclonal
  • Suitable for Affinity Chromatography, ICC/IF and IP
  • Reacts with AAV2 Rep40, Rep52, Rep68 and Rep78
  • Isotype IgG1

€220.00*
anti-AAV2 Replicase mouse monoclonal, 259.5, lyophilized, purified
Cat. No. 61071
Quantity: 50 µg
  • Purified, lyophilized
  • Mouse monoclonal
  • Suitable for WB
  • Reacts with AAV2 Rep40, Rep52, Rep68 and Rep78
  • Isotype: IgG1

Variants from €220.00*
€370.00*
anti-AAV2 Replicase mouse monoclonal, 303.9, lyophilized, purified
Cat. No. 61069
  • Mouse monoclonal
  • Suitable for WB
  • Reacts with AAV2 Rep40, Rep52, Rep68 and Rep78
  • Isotype: IgG1

€389.00*
anti-AAV2 Replicase mouse monoclonal, 76.3, lyophilized, purified
Cat. No. 61073
  • Mouse Monoclonal
  • Suitable for WB, ICC/IF and IP
  • Reacts with AAV2 Rep52 and Rep78
  • Isotype: IgG1

€370.00*
Dip’n’Check AAV2 and AAV3 - lateral flow assay
Cat. No. PR5223
  • Rapid lateral flow test for the detection of AAV2 and AAV3 capsids
  • Semi-quantitative AAV titer determination in cell lysates and purified preparations
  • Detection of full and empty AAV2 and AAV3 capsids

€163.00*
OptiPrep™ - Iodixanol
Cat. No. 1893 (previous 1114542)
  • Highly effective for the separation of full and empty AAV particles
  • Designed for the purification of viruses (such as AAV)
  • Useful to isolate different cell types and organelles
  • Ready-made, sterile and endotoxin-tested solution of iodixanol

€178.00*
Simple Plex AAV2 Assay
Cat. No. SPCKB-OT-005905
  • Automated ELISA kit for quantification of AAV2 virons and assembled capsids
  • A20R antibody (Cat. No. 610298) is used as capture and detection antibody
  • Suitable for the ProteinSimple Ella system
Product is not available in APAC countries

€798.00*