+49 6221 8278-0
info@progen.com
Go to homepage

AAV9 VP1, recombinant protein

SDS PAGE analysis to evaluate the purity of the AAV9 VP1 (Cat. No. 640842). To perform SDS PAGE analysis, 1 µg of protein was diluted in 10 µl PBS and sample buffer and denatured at 95°C for 5 min. The sample was loaded onto a 4-20% gradient gel (40 min at 200 V). Afterwards, the gel was stained for 1 h at RT with Coomassie solution and destained with water. The purity of AAV9 VP1 is > 95%.
Pipetting scheme for western blot analysis using a mix of the AAV9 capsid proteins (Cat. No. 640842, 640843, 640844). To create a VP mixture with the molar ratio 1:1:10 (VP1:VP2:VP3), please pre-dilute VP1 and VP2 1:10 to yield a final concentration of 10 µg/ml (green table). Pipette the pre-diluted VP1 and VP2 proteins and mix them with the undiluted VP3 protein in your sample buffer and water (blue table). The example with 2x and 3x sample buffer and the required volumes are indicated in the pipetting scheme. Thus, in one lane, 10 µl of the VP mix can be loaded onto the SDS PAGE and analyzed by Western blot using the B1 antibody (Cat. No. 690058, Cat. No. 61058-488, Cat. No. 61058-647).
Undiluited = 100 µg/ml, pre-diluted = 10 µg/ml

Western blot analysis of recombinant AAV9 capsid proteins (Cat. No. 640842, 640843, 640844)  and denatured AAV9 capsids with B1 antibody (Cat. No. 690058). Western blot analysis was performed on the precise molar ratio of 1:1:10 (VP1:VP2:VP3) either in separate lanes or combined in one lane and on 3.3E+09 denatured AAV9 capsids. The PVDF membrane was blocked with 5% milk in PBST for 1 h at RT. The primary antibody anti-AAV VP1/VP2/VP3, B1 (Cat. No. 690058) was diluted in blocking buffer (antibody concentration 500 ng/ml) and incubated for 1 h at RT. The secondary antibody anti-mouse IgG HRP was also diluted in blocking buffer (antibody concentration 200 ng/ml) and incubated for 1 h at RT. The bands were visualized by chemiluminescent detection using Pierce™ ECL Western Blotting Substrate.


SDS PAGE analysis to evaluate the purity of the AAV9 VP1, VP2 and VP3 (Cat. No. 72009). To perform SDS PAGE analysis, 1 µg of protein was diluted in 10 µl PBS and sample buffer and denatured at 95°C for 5 min. The samples were loaded onto a 4-20% gradient gel (40 min at 200 V). Afterwards, the gel was stained for 1 h at RT with Coomassie solution and destained with water. The purity of AAV9 VP1, VP2 and VP3 is > 95%.
Pipetting scheme for western blot analysis using the AAV9 capsid proteins (Cat. No. 640842, 640843, 640844) in separate lanes. To analyze the molar ratio of 1:1:10, it is recommended to load VP1, VP2 and VP3 as described in the pipetting scheme above. Therefore, the indicated volumes of the proteins (concentration 100 µg/ml) should be diluted with the appropriate amount of sample buffer and distilled water. 10 µl of each solution can be separately loaded onto the SDS PAGE and analyzed by Western blot using the B1 antibody (Cat. No. 690058, Cat. No. 61058-488, Cat. No. 61058-647).


Western blot analysis of recombinant AAV2 VP proteins (Cat. No. 72001), recombinant AAV5 VP proteins (Cat. No. 72005), recombinant AAV6 VP proteins (Cat. No. 72006), recombinant AAV8 VP proteins (Cat. No. 72008) and recombiant AAV9 VP proteins (Cat. No. 72009) with B1 antibody (Cat. No. 690058). Western blot analysis was performed on the precise molar ratio of 1:1:10 (13.5 ng VP1:11 ng VP2:100 ng VP3) combined in one lane. The PVDF membrane was blocked with 5% milk in PBST for 1 h at RT.
The primary antibody anti-AAV VP1/VP2/VP3, B1 (Cat. No. 690058) was diluted in blocking buffer (antibody concentration 500 ng/ml) and incubated for 1 h at RT. The secondary antibody anti-mouse IgG HRP was also diluted in blocking buffer (antibody concentration 200 ng/ml) and incubated for 1 h at RT. The bands were visualized by chemiluminescent detection using Pierce™ ECL Western Blotting Substrate.


Western blot analysis of recombinant AAV9 VP1 (Cat. No. 640842) with B1 antibody (Cat. No. 690058) and ECL detection. Western blot analysis was performed on different amounts of recombinant AAV-VP1 ranging from 7 ng to 34 ng. The PVDF membrane was blocked with 5% milk in PBST for 1 h at RT. The primary antibody anti-AAV VP1/VP2/VP3, B1 (Cat. No. 690058) was diluted in blocking buffer (antibody concentration 500 ng/ml) and incubated for 1 h at RT. The secondary antibody anti-mouse IgG HRP was also diluted in blocking buffer (antibody concentration 200 ng/ml) and incubated for 1 h at RT. The bands were visualized by chemiluminescent detection using Pierce™ ECL Western Blotting Substrate.
Cat. No. 640842

Prices excl. VAT

Available, delivery time: 1-10 days

€291.00*

Datasheet
Key Features
•    Recombinant AAV9 capsid protein VP1
•    Useful in combination with AAV9 VP2 and VP3 for ratio analysis (also available as set, Cat. No. 72009)
•    Precise molar concentration
•    Suitable for WB, dot blot, SDS PAGE

Not available in China and in the Russian Federation.
For US shipment, the packages are only sent out for delivery on Mondays and Tuesdays, in the EU from Monday until Wednesday.

Product description
Quantity 10 µg
Application Dot blot, SDS PAGE, WB
Purification Ni-NTA chromatography
Storage -80°C
Intended use Research use only
Concentration 100 µg/ml (1.19 µM)
Formulation Liquid, 6 M urea in PBS
Source Escherichia coli
Molecular weight 83.5 kDa (calculated Mw from aa sequence)
Purity > 95% (determined by SDS PAGE)
Product description

N-terminal His-tagged (MGSSHHHHHHSSGLVPRGSH) recombinant AAV9 capsid protein VP1
Applications
Tested applications Tested dilutions
Dot Blot 100 ng, depending on primary antibody and detection method
SDS PAGE 1 µg
Western Blot (WB) 5-20 ng, depending on primary antibody and detection method
Background

The AAV capsid consists of three capsid proteins, i.e. VP1, VP2 and VP3, which differ in their N-terminus and encapsulate the genomic ssDNA. In native virus particles, the three proteins form subunits with a ratio of 1:1:10 (VP1:VP2:VP3), in a total number of 60 subunits per capsid.
The recombinant AAV9 VP1 protein in combination with recombinant AAV9 VP2 (Cat. No. 640843) and recombinant AAV9 VP3 (Cat. No. 640844) can be used to create a mixture with the precise molar ratio of 1:1:10 to compare the protein composition of the viral capsid in your sample by protein detection methods, e.g. western blot.
All three recombinant AAV9 capsid proteins are available as set (Cat. No. 72009) or as individual proteins (Cat. No. 640842, 640843, 640844).

Note: please find an example how to prepare western blot samples in the pipetting scheme below. Aliquots of the remaining samples can be stored at -80°C for reuse.
Downloads
File
Category
Size
Filetype
File Poster AAV VP protein standard
Category Poster
Size 1.44 MB
Filetype pdf
Datasheet
MSDS
Customer Reviews

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Contact

Need more product information?

Learn more

AAV ELISAs


AAV Antibodies


AAV Standards


AAV Dip'n'Check


Related Products

AAV9 ELISA Control
AAV9 ELISA Control
Cat. No. PRAAV9-C
  • Consists of fully assembled, empty AAV9 capsids
  • Represents serotype-specific conformational epitopes
  • Reliable positive control for ELISA

€110.00*
AAV9 empty capsids
AAV9 empty capsids
Cat. No. 66V090
  • Fully assembled, empty AAV9 capsids
  • Serotype-specific conformational epitopes
  • Reliable positive control for dot blot, western blot, ELISA
  • Quality controlled for purity, AAV titer and filling grade
  • Alignment to internal reference standard material
Not available in the Russian Federation.
For US shipment, the packages are only sent out for delivery on Mondays and Tuesdays, in the EU from Monday until Wednesday.

€269.00*
AAV9 standard material (eGFP)
AAV9 standard material (eGFP)
Cat. No. 66V091
  • Fully assembled AAV9 capsids filled with an eGFP reporter gene controlled by a CMV promoter
  • Serotype-specific conformational epitopes
  • Reliable positive control for dot blot, western blot, ELISA, PCR and cell-based assays
  • Quality controlled for purity, filling grade, aggregation, total capsid and genome titer
  • Alignment to internal reference standard material
Not available in the Russian Federation.
For US shipment, the packages are only sent out for delivery on Mondays and Tuesdays, in the EU from Monday until Wednesday.

€580.00*
AAV9 Titration ELISA
AAV9 Titration ELISA
Cat. No. PRAAV9
  • ELISA for quantitation of AAV9 capsids
  • Detection of full and empty AAV9 capsids
  • ADK9 antibody is used as capture and detection antibody

€560.00*
AAV9 Xpress ELISA
AAV9 Xpress ELISA
Cat. No. PRAAV9XP
Fast, easy and reliable AAV9 titer determination:
  • get results in less than 2 hours and increase your daily sample throughput
  • easy workflow & process integration
  • same accuracy and reproducibility as the standard AAV9 Titration ELISA
  • ADK9 antibody is used as capture and detection antibody

€685.00*
anti-AAV VP1/VP2/VP3 mouse monoclonal, B1, liquid, purified
anti-AAV VP1/VP2/VP3 mouse monoclonal, B1, liquid, purified
Cat. No. 690058
Quantity: 1 ml
  • Mouse monoclonal
  • Suitable for affinity chromatography, dot blot, ICC/IF, IP and WB
  • Reacts with denatured VP1, VP2, VP3 proteins of AAV1, 2, 3, 5, 6, 7, 8, 9, rh10, DJ
  • Isotype: IgG1

Variants from €110.00*
€382.00*
anti-AAV VP1/VP2/VP3 rabbit polyclonal (VP51), serum
anti-AAV VP1/VP2/VP3 rabbit polyclonal (VP51), serum
Cat. No. 61084
  • Rabbit polyclonal
  • Suitable for ELISA, ICC/IF, IP and WB
  • Reacts with AAV1, AAV2, AAV3, AAV5, AAV6, AAV7, AAV8, AAV9, AAVrh10, AAVDJ and AAVrh74, weakly with AAV4
  • Strong affinity for denatured capsid proteins
  • Weak affinity for native capsids

€382.00*
anti-AAV9 (intact particle) mouse monoclonal, ADK9, liquid, purified
anti-AAV9 (intact particle) mouse monoclonal, ADK9, liquid, purified
Cat. No. 690162
Quantity: 1 ml (50 µg/ml)
  • Purified, liquid
  • Mouse monoclonal
  • Suitable for dot blot, ELISA, ICC and neutralization assay
  • Reacts with AAV9 intact particles
  • Isotype: IgA kappa

Variants from €110.00*
€447.00*
anti-AAV9 (intact particle) mouse recombinant, ADK9-1R, lyophilized, purified
anti-AAV9 (intact particle) mouse recombinant, ADK9-1R, lyophilized, purified
Cat. No. 610178
Quantity: 50 µg
  • Purified, lyophilized
  • Recombinant antibody
  • Suitable for dot blot, ELISA and neutralization assay
  • Reacts with AAV9 intacts particles
  • Isotype: mouse IgG1

Variants from €110.00*
€447.00*
anti-AAV9, human chimeric, ADK9-h1
anti-AAV9, human chimeric, ADK9-h1
Cat. No. 692378
Quantity: 1 ml (50 µg/ml)
  • Recombinant chimeric (human Fc region)
  • Suitable for dot blot, neutralization assay and serology ELISA
  • Reacts with AAV9 intact capsids
  • Isotype: IgG1

Variants from €170.00*
€450.00*
Dip’n’Check AAV9 - lateral flow assay
Dip’n’Check AAV9 - lateral flow assay
Cat. No. PR5209
  • Rapid lateral flow test for the detection of AAV9 capsids
  • Semi-quantitative AAV titer determination in cell lysates and purified preparations
  • Detection of full and empty AAV9 capsids

€163.00*
OptiPrep™ - Iodixanol
OptiPrep™ - Iodixanol
Cat. No. 1893
  • Highly effective density gradient media for the separation of full and empty AAV particles
  • Designed for the purification of viruses (such as AAV)
  • Useful to isolate different cell types and organelles
  • Ready-made, sterile and endotoxin-tested solution of iodixanol

 

€178.00*
This website uses cookies to ensure the best experience possible. More information...